COP value are very important index in many
industries, in the middle of the air source heat pump water heater, represented
by the heating coefficient of performance.Air source heat pump water heater in
circulation work, the heating coefficient of performance COPh refers to in a
certain condition, the compressor system with the same heat of the ratio of the
compressor shaft power under the condition of PE.In simple terms, the COP is
actually a heat pump system and the implementation of the heating and the ratio
of the input power, under the same conditions, the ratio shows that the
efficiency of the heat pump system, the higher the more the greater the energy
saving.
The user wants to know the source of the COP
value, can under standard conditions were calculated by formula.Air source heat
pump water heater under standard conditions: temperature 25 degrees, the water
temperature of 15 degrees.Water temperature from 15 degrees heat to 55 degrees,
measured power consumption for W;Water temperature from 15 degrees heat to 55
degrees, the time required for t;Tank measured net capacity to remember L;Water
heat gain as: Q=C*L*△T, average water heater heating capacity is: Q =
Q/T, water heater of the average power consumption is: P = W/T, measured the
COP for standard conditions: COP = q/P=C*L*△T/W.
In addition to the above way, consumers can also be
concluded that COP value in the simple way, such as air source heat pump for heating system heat is P1 (KW) of the rated power of the heat pump is P2 (KW)
then the COP = P1 / P2.Air source heat pump water heater of COP value not only
receive the objective external environment influence, also will be affected by
their own factors, such as the coefficient of performance of the compressor,
heat pump system: (the so-called system match is to point to: compressor,
condenser, evaporator, throttle body and the matching performance of automatic
control system.)Obtained from the COP value is more than just air can water
heater can effect comparing, can be roughly understanding to the matching
performance between the internal parts.
No comments:
Post a Comment