Villa heating and cooling options have new tactics

Live a spacious villa is the dream of many people’s lives. However, to really enjoy life in the villa, not only to worry about making money, have to choose a lot of thought in the selection of equipment.

Villa with ordinary residential compared to the structure and construction area has obvious differences, the villa as few as a few hundred square meters, a thousand square meters, so that, whether it is cooling or heating, difficulty and ordinary residential phase Bigger than a lot. In the face of such a situation, the villagers are how to solve it? The answer is simple, use air source heat pump.

Air source heat pump is favored for many reasons, but the most important thing is energy saving. Air source heat pump by the evaporator, compressor, heat exchanger and other components, rely on “anti-carnot principle” heating. First through the evaporator to absorb a lot of free air heat, and then pass the heat to the compressor, the compressor will convert these heat into high-grade heat, the final output heating to the room. This way of transporting heat from the air, so that the air source heat pump consumes 1 kWh, you can get 4kw of heat, heating efficiency of 400%, than the traditional electric heating, coal boiler to save a lot of energy.

In summer, the air source heat pump can be switched to air conditioning mode. In air conditioning mode, the air source heat pump can produce cold water, with the fan coil discharge a lot of cold, in order to reduce the indoor temperature. Data show that even if the external temperature up to 30 ℃, air-source heat pump to open the cooling mode, it can also reduce the room temperature to about 20 ℃, the cooling effect is not less than the air conditioning.

Whether it is cooling or heating, air-source heat pumps are known for their comfort. It “water cycle” approach, the air-conditioning, heating delivered to the interior, this mechanism to make the wind more gentle, but also reduces the evaporation of water on the human skin surface, there will be no obvious dry mouth, but will not induce cough , cold and other symptoms, bring is truly comfortable heating, cooling experience.

Not only comfortable and energy-saving, air-source heat pump environmental effects are amazing. Because the air source heat pump uses the heat in the air to heat, the heat pump relies on the electric energy to drive. The heat pump equipment does not consume any coal and natural gas and naturally does not produce harmful gases, which can create a good environment for the villa . Air-source heat pump heating and cooling advantages so much, no wonder the choice of many villa tenants.

Air source heat pump new market - infant swimming pool hot water supply

Infant swimming pool more common in cities, people’s living standards gradually increased after an emerging product. Swimming pool has a professional swimming pool, you can provide just enough comfort for the newborn child’s hot water swimming experience. The opening of a family of infants and young children’s swimming pool, but also to the relevant industrial chain began to be active. Among them, the air source heat pump hot water market as an important device, also ushered in the new development opportunities.

Air-source heat pump by a lot of infants and young children’s swimming pool owner to fancy, there are several reasons, the first to say is safe. Normally, equipment for supplying hot water to buildings includes oil-fired boilers and coal-fired boilers. Both of these facilities have an open flame during the heating process, posing a potential safety hazard. For infants and young children’s swimming pool this place has a demanding safety requirements, it is not so suitable.

Air source heat pump driven by electric energy, through the refrigerant absorbs heat in the air to produce hot water. Heating process, do not consume any fuel, natural gas, the flame does not appear to burn, so completely eliminate fire hazards. Heat pump heat exchanger also uses water and electricity separation design, but also reduce the probability of leakage of equipment at the root causes, has become the safe patron saint of the babies.

Then analyze the cost of air-source heat pump heating costs. In Guangzhou, there are quite a few cases of using the air source heat pump to heat the baby swimming pool. The author has obtained a detailed data from the list below. A baby swimming pool installed a 5P air source hot water unit. The installation cost of the project is about 20,000 yuan or so, which is about 8,000 yuan higher than the nearby swimming pool that uses oil-fired boiler heating.

However, in the subsequent use, the energy-saving effect of air-source heat pump gradually highlights. The use of oil-fired boiler heating, daily consumption of about 30L of fuel consumption, oil prices at 6.7 yuan / liter basis, the daily operation cost of oil-fired boilers over 200 yuan. Air source heat pump, as it is taken from the air, the daily power consumption is only about 20 kWh, commercial electricity price of 1.5 yuan / kWh, count down, heat pump daily operating costs only tens of dollars, far below the oil-fired boiler .

With the increase of newborns, air source heat pumps will also come one after another in the next few years in the market a small outbreak.

Air source heat pump floor heating and radiator which is better

With the constant change of the weather is cold, people also particular concern for heating, mostly to install heating system at present, the most popular in the market is the air source heat pump heating floor heating and radiator heating, for above two hot heating ways which one is better, here is to analyze the advantages and disadvantages of them and so that everyone can have a full understanding.

Air source heat pump floor heating and radiator, by contrast, both the running principle of basic similar, is through the hot gas send out to realize the rise of temperature, finish heating, but still exist between different, installation of floor heating is in installation is needed before operation, the building is decorated after renovation is difficult when installation, quantity is big, time is longer, so after the installation is not recommended, and the radiator before decorate and decorate after all its installation will not cause any influence, less construction difficulty, installation time is short, convenient and simple. 

Air source heat pump installation, the method is relatively hidden, will not take up too much space, will not affect the beautiful house, and it has obvious advantage that the ordinary floor heating, heating faster when using, heat evenly, comfortable is extremely strong, energy saving effect is remarkable, and the radiator need to choose suitable location to install, will occupy a certain space, so that air source heat pump heating floor had a good choice. 

Air source heat pump floor heating is buried in the ground, is by raising the temperature of low temperature hot water, transfer heat from underground into the air, as a result, the heat from bottom upm confirms to the principle of keeping in good health, and the heat evenly inside the air, the temperature difference is small, comfortable and reliable. Radiator is only a fraction of the concentrated heat is to heat the air around first, and then achieve the purpose of heating by air convection heat transfer, this way of thermal comfort is relatively poor.

For now, the air source heat pump heating is a clean way of heating, with the continuous development of air source heat pump, remarkable achievements in the field of heating, and is used by more and more people, so will gradually become the first choice for heating.

Another advantage is use of air source heat pump running costs are relatively low, it is compared with other heating way, by contrast, it is also in favor of the heating way of the human body health.  

Air Energy Efine Division-Fluorine Cycle and Water Cycle

Air energy work principle: is a kind of can obtained from the nature of air, water or soil low heat, after electric power, the output can be used by people of the high grade heat equipment.A kind of energy-saving, environmental protection, heating and hot water cleaning equipment.Mainly using reverse carnot cycle to absorb heat from the atmosphere, is different from the solar energy.

Fluoride circulating air
Fluorine circulating air to the main parts by the compressor, condenser, throttle valve, evaporator and control the system.The evaporator absorbs heat from the surroundings by evaporation heat transfer working medium, the compressor working medium steam temperature and pressure rise after compression, high temperature steam through the condenser condensed liquid, releasing heat transfer to the water in the tank.After the condensation heat transfer working medium through the throttle valve is returned to the evaporator, and then evaporate, so cycle.

The water cycle air
Water cycle of the host is the built-in heat exchanger, water tank without coil, heating water through continuous cycle.Water cycle air heating mode, the classification of energy from academia is refers to the initial cold water several times through the air heating can host cycle of heat exchanger in water heater, water temperature reaches the set temperature.In daily application in order to facilitate understanding and distinguish, usually habitually called "water cycle air can". Air and water cycle to the corresponding is "fluorine circulating air".

Water circulation heating method is the more popular a kind of heating way in the world, the water cycle can air within the host adds a heat exchanger, heat exchange on the host, tank heat exchange coil.Work with a host of internal circulation pump will be pulled out in the cold water tank through the heat exchanger heating after back to the water tank, water is heated until the water tank.Through the water circulating water heating.Referred to as the "water cycle". At present, all the commercial water engineering is to use the "water cycle" heating mode.